Product details:

Fabricate lockers square, rigid and without warp, with metal faces flat and free from dents or distortion. Make all exposed metal edges safe to touch. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of locker doors or frames except for fastening of number plates and recessed handle. Dimensions - 12 W x 12 D x 78 H in. Features Body Construction Knock-down, 24 gauge. Body Styles Single, double and triple tier. Door 16 gauge, louvered for added ventilation. Hinges Continuous piano type. Handle Single-point thru-the-door friction catch door pull designed for use with a padlock. Hooks One double prong ceiling hook and two single hooks per single and double tier opening. One double ceiling hook for triple tier. Coat Rods Available for single tier at a nominal cost. Shelves Hat shelf is included in single tier lockers. Legs 6 in. high legs are standard. Lockers without legs are available for a nominal charge. Finishing All locker parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees Fahrenheit for a minimum of 20 minutes to provide a tough durable finish. Colors available are 725 Hallowell Gray and 729 Parchment. Frame Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and h